JetFLEX™ Heater Ducting
A wire reinforced industrial-grade flexible heater duct for portable and temporary heating, pest and climate control.
FEATURES:
-
External wearstrip attached to protect from ground abrasion.
-
Spiral wire reinforcement is captured between two layers of fabric, increasing airflow performance when compared to heater socks.
-
Assembled with high-strength (lock-stitch) sewn construction.
-
Duct maintains flexibility in cold weather conditions.
-
Standard end finish is a soft cuff with strap on the air inlet and a wire round end ring on the air outlet.
SPECIFICATIONS:
Diameter Range: 8” – 36” ID (203 – 915mm)
Standard Length: 25’ (7.6m)
Standard Colors: Black with gray high heat starter
Temperature Rating: -65 to 375°F (-53 to 190°C)
FABRIC:
Tightly woven polyester reinforced fabric with urethane topcoat and a high-heat Silicone (500°F) fabric starter section. Both are flame resistant.
JetStream™ Heater Ducting
A wire reinforced industrial-grade flexible high-temperature heater duct for portable and temporary heating.
FEATURES:
-
High-strength (lock-stitch) sewn construction.
-
External wearstrip protects from ground abrasion.
-
Spiral wire reinforcement is captured between two layers of fabric, increasing airflow performance when compared to heater socks.
-
For high temperature and exhaust applications.
-
Duct maintains exceptional flexibility in cold weather conditions.
SPECIFICATIONS:
Diameter Range: 6” – 36” ID (152mm to 915mm)
Standard Length: 25’ (7.6m)
Standard Color: Gray
Pitch: 4” (10cm) Return Air; 7″ (18cm) Discharge / Supply Air
Temperature Rating: -65 to 500°F (-53 to 260°C)
Fabric Weight: 17 oz/yd² (576g/m²)
FABRIC:
Grey silicone coated fiberglass fabric, maintains flexibility in cold weather conditions and has flame and abrasion resistant properties.
